Sync Announces Two New Stabilizers For iPhone & GoPro

When patrolling the floor of PhotoPlus this year, we bumped into Jed Hirschfeld, Director Of Marketing for Sync Technology, a new concern out of Fremont, California. Sync is readying two new gimbal based stabilizers, a Smartphone model and a GoPro. The SYNC Smartphone Stabilizer claims to make it easy to capture stable handheld footage with your iPhone 4, 5, 6, and most other smarphones with screen sizes under 5.5″.
sync iphone stabilizer
The 2-axis stabilizer features two brushless motors and incorporates a gyroscope to accurately predict movements in order to keep your camera level and counter shaky movement. In addition, the Smartphone model includes a rechargeable Li-Po battery is said to last up to two hours, and a toggle switch on the front of the handgrip provides 90° of controllable tilt.
sync technology smartphone iphone gimbal stabilizer
Features:
» Compatible with most smartphones with screens smaller than 5.5 inches, including iPhone 4, 5, and 6 (iPhone 6+ is not compatible)
» Advanced stabilization algorithm
» Powerful proprietary MCU 32-bit CPU
» Silent brushless motors
» Does not require calibration
» Motor reaction time of 20,000 reactions per second
» Controllable tilt with a 90° range
» Instant start-up with no calibration needed
» Light and compact design weighs only 13 oz (including battery)
» Made from ABS thermo-plastic, Aluminum alloy and Stainless steel
» Number of Motors: 2 x Brushless motors
» Battery Operating Time: 2 hours
» Battery Charging Time: 1.5 hours
» Operating Temperature: 14 to 113°F / -10 to 45°C
» Dimensions (WxHxD): 5.8 x 9.5 x 4.7″ / 14.7 x 24.1 x 11.9 cm

Sync’s Smartphone stabilizer is currently available for pre-order for $249.
 
synctech-gopro-stabilizer
The SYNC Adventure Camera Stabilizer for GoPro features a 2-axis gimbal with brushless motors and employs a gyroscope to accurately predict movements to keep your camera level and steady. The SYNC Adventure Camera Stabilizer is compatible with a naked HERO 3, 3+, or 4, and incorporates a USB docking connector to send a live video monitoring feed to a built-in 3.5″ rotatable LCD screen. Additional features include a rechargeable Li-Po battery that lasts up to two hours, and a toggle switch on the front of the handgrip that provides 180° of controllable tilt.

Features:
» Compatible with GoPro HERO 3, 3+, and 4 (without protective housings)
» Advanced stabilization algorithm
» Powerful proprietary MCU 32-bit CPU
» Silent brushless motors
» Motor reaction time of 20,000 reactions per second
» 3.5″ Rotatable LCD screen
» Camera cradle with USB docking connector
» Controllable tilt with a 180° range
» Instant start-up with no calibration
» Light and compact design weighs only 1 lb (including battery)
» Firmware can be updated
» Made from ABS thermo-plastic, Aluminum alloy & Stainless steel
» Number of Motors: 2 x Brushless motors
» Ports: 1 x Mini-USB docking connector in camera cradle
» Battery Operating Time: 2 hours
» Battery Charging Time: 1.5 hours
» Operating Temperature: 14 to 113°F / -10 to 45°C
» Dimensions (WxHxD): 5.3 x 9.5 x 5.4″ / 13.46 x 24.13 x 13.72 cm

Sync’s Adventure stabilizer for GoPro is currently available for pre-order for $349.
 
 Sync 
 
 

Share This Post On

3 Comments

  1. When is the stablizer for the gopro going to ship I ordered it from b&h and its been on backorder for a month so far I’ll wait, but I’d like to
    know how much longer?

    Post a Reply

Trackbacks/Pingbacks

  1. Chinese GoPro Stabilization Products Yet To Stabilize iPhone - […]To make matters more confusing, the SP1 and GP1 products from Gazer are identical to Sync Technologies’ new stabilization products,…

Leave a Reply to dino hatzakos Cancel reply

Your email address will not be published. Required fields are marked *